Select a different country or region to see specific content for your location.
US

Please select a language / region

 

Biocompatible plastics

Röchling has set up Europe’s biggest storage facility for semi-finished products with biocompatible plastics for medical technology in order to be immediately available for supplying to you. Our Medical Grade product line (MG) includes the materials:

With Medical Grade we offer a host of modifications and colours. If your requirements are even higher, we will jointly develop with you the perfect material for your application. The extent of the tests conducted on biocompatibility varies depending on the material concerned.

Medical Grade

With Medical Grade (MG) materials, a product range is at your disposal that has been especially developed with medical technology in mind.

Raw materials

All resins are high-quality materials from reputable sources. The compliance of their chemical composition with the food safety and hygiene requirements laid down by the FDA is confirmed by the manufacturers for all materials.

Traceability

Röchling offers a full traceability for MG products, allowing them to be traced from the semi-finished product right back to the batch of raw materials. Our ISO 13485-compliant quality management system enables us to ensure that the relevant requirements are met, verified and documented. 

Sterilisation properties

Information on the suitability of the materials for sterilisation can be found on page 18. The sterilisation methods which may be applied, and the number of sterilisation cycles which may be undergone by a medical product which has been made from our materials, depends on the part design, processing parameters, sterilisation temperature and exposure to chemicals. The manufacturer is therefore required to establish and evaluate the appropriate sterilisation method for each medical product (and, where applicable, the permitted number of sterilisation cycles).

Chemical resistance

The MG materials show a high resistance against many commercially available disinfectants and cleaning agents. The results of basic tests are provided by the raw material suppliers and can be used as initial selection criteria. It is essential to test the materials in the relevant working conditions (temperature/concentration/time).

Biocompatibility

There are test results for bio-compatibility according to ISO 10993-5 available for the Medical Grade materials (MG addition in the trade name) from Röchling Industrial. The tests were conducted directly on the semi-finished product for all standard colours.

Within the scope of selecting the suitable ma- terial for a medical-technical application, not only the technical requirements have to be considered. Often it is necessary to ensure the material is compatible with the human organism. Conforming with the European Guideline for Medical Products MDD 93/42 EEC, this biological assessment of a product is invariably requisite, if there is direct contact of the material or product with the patient.

DIN EN ISO 10993

The scope of the biocompatibility tests as per ISO 10993 on the specific nature of the physical contact, as well as on the duration of contact.

Safety & Service

Our materials meeting the respective require-ments – in conjunction with a high degree of application-specific expertise and experience – form the basis for the success of our customers from the medical technology sector.

Alongside standard materials, these are, in particular, the Medical Grade materials from Röchling Industrial. These materials have been tested for biocompatibility on the semi-finished product conforming to ISO 10993-5 standard.

This service package is the ideal basis for the selection of suitable materials for medical products or for components of medical products. It is inten- ded to assist our customers with the process of obtaining approval for their end products. It should be borne in mind that semi-finished plastic products are only the precursor to the final medical or pharmaceutical products/components. Regarding processing and application parameters of which we are not aware, it is the responsibility of the medical product manufacturer to ensure the suitability of our materials in the end product with respect to their compliance with the applicable directives and laws.

As the strategic partner of our customers from the medical technology sector, we are well acquainted with the special requirements of this industry. Seen in this light, we offer today the manufacturers of medical technical instruments and equipment more than mere thermoplastic semi-finished products on the basis of various high-performance plastics.

Alongside our comprehensive knowledge of plastics, our customers profit from our long years of experience in the medical technical industry. We know the requirements of the pertinent regulations, such as the Medical Device Act (MPG), the European Guideline for Medical Products 93/42 EEC, and are glad to advise our customers when they look for the suitable materials for their applications.

And what happens if there is not yet a suitable product available? Then our staff in the development departments will work on the new, customised material and realize your ideas
with you.

Application

Today, end products made of our materials are used in a host of medical articles, devices and instruments. Apart from the Medical Grade materials with proven biocompatibility, these are also standard materials not coming into direct contact with patients.

Surgical instruments

Alongside grips and handles for classical surgical instruments or probe adapters (trials) for orthopaedic technology, high-performance plastics are implemented particularly as components for devices of minimally invasive surgery. By way of example, ocular funnels, grip rings or distal end heads for endoscopes are made of high-performance plastics.

Dental technology

In addition to the instruments used, inter alia, for the prophylaxis of dental diseases, the materials from Röchling Industrial are also to be found in dental treatment and therapy units.

Diagnostic radiology

Large-sized equipment of imaging diagnostic methods, such as X-ray technology, computer or magnetic resonance imaging, is unthinkable today without plastic components. They provide their services both inconspicuously inside the equipment as well as in biocompatible components, coming into direct contact with the patients (e.g. as patient supports or biopsy units). Unlike metallic materials, many plastics are transparent to X-rays in these diagnostic methods, and thus do not distort test results.

Therapeutic systems

In anaesthetic and respiratory units, pistons, valves, supports and adapters made of high-performance plastics safeguard patients’ medical care. Dialysis units and cardiovascular support systems are operated with the assistance of machined end products made of Röchling plastics.

Pharmacy & biotechnology

No matter whether in spectrometers for instrumental analytics or in chromatography systems for purification of proteins in pharmaceutical production – components, such as sample changers, fluid distributors or valve housings, machined from semi-finished plastic products from Röchling Industrial – have been well established in these fields of application for many years now.

Product Information Medical Grades Röchling Industrial

 
Search

Refine Results

Contact

Share

Print to PDF

Newsletter Registration

Select Website

Roechling_Industrial_Banner.jpg
Plastics for technical Applications

Industrial