Foamlite® – Lightweight plastic sheets for greater benefits
We have developed the closed-pore foamed material Foamlite® P especially for applications in which construction materials need to have a very low weight and have a high level of mechanical stability. This opens up a wide range of possibilities in lightweight design.
30 per cent lighter
Foamlite® P lightweight boards are nearly 30 per cent lighter than comparable compact sheets. Depending on the application, the lightweight plastic sheet saves on materials, conserves resources and is easy to handle. This gives you
completely new possibilities in the design of your application and in dimensioning
as well as economic advantages.
With its many and varied properties, the lightweight board Foamlite® offers you advantages in construction and handling compared with other materials:
Density: 0,65 g/cm³
Approximately 30 per cent less weight than compact sheets
Advantages in construction and dimensioning & easy handling
Long service life
Virtually no water absorption
No decomposition, rotting or delamination
Long-term dimensional stability
Superior surface quality
Option of smooth surface or grained on both sides with high scratch resistance
Slip-resistant surface „cubic grain“ available
Long-lasting high-quality appearance
High mechanical strength
Very good combination of toughness and rigidity
Good insulation properties
Air bubbles in the foam core provide good thermal insulation and noise reduction
Easy to machine with woodworking tools
Good welding properties
Low internal stress
Foamlite® P is a PP-C-based lightweight construction material. With a density of 0.65 g/cm³, Foamlite® P offers clear weight advantages over a sheet made of compact polypropylene at 0.915 g/cm³. The material also has an excellent combination of toughness, high rigidity, strength and chemical resistance. The surface is optionally available with a smooth finish or with a fine grain.
Foamlite® – Product variety
Foamlite® is available in special product variants which not only offer you low weight but are also ideal for use in a wide variety of applications.
Foamlite® P „cubic grain“
Foamlite® P is available in a slip-resistant design with the special "cubic grain" surface structure. The three-dimensional, cube-shaped grain ensures a mechanical frictional connection between floor and shoe. The slip-resistant property of Foamlite® "cubic grain" is tested according to the following guidelines:
DIN 51097: Testing of floor coverings; determination of the anti-slip properties; wet loaded barefoot areas
DIN 51130: Testing of floor coverings; determination of the anti-slip properties; work rooms and work areas with slip risk
Contact with food
Foamlite® P FG blue
Foamlite® P FG blue is a special material for the food industry. It meets the requirements of EU Regulation 10/2011 – Plastic materials and articles intended to come into contact with food – as well as the requirements of the US Food and Drug Administration (FDA). Its UV resistance makes Foamlite® P FG blue suitable for use in industrial food areas with UV-based hygiene systems. The material is available in blue (RAL 5010). Further colours on request.
Protection against electrostatic risks
Foamlite® P AST
We have developed Foamlite® P AST especially for areas where there is a need for controlled conductance of electrostatic charge and low weight at the same time. High voltage pulses can arise with uncontrolled electrostatic discharge and destroy sensitive equipment, components and workpieces. With Foamlite® P AST, these components are protected by controlled conductance of the electrostatic charge.
Foamlite® G is a PE-HD-based lightweight plastic sheet. With a density of 0.75 g/cm³, Foamlite® G has a weight advantage of more than 20 per cent compared with compact polyethylene at 0.95 g/cm³. The material boasts a superior surface quality, is optionally available with a smooth or grained finish and is very easy to process. At the same time, Foamlite® G can be welded with polyethylene (PE) very easily.
Foamlite® P can be produced in many sizes, thicknesses and colours and with different properties. We are happy to make a product tailored to your individual requirements.
Sheet thicknesses: 6 – 21 mm
Widths: up to 2,000 mm
Length: theoretically unlimited
Foamlite® P can be produced in virtually any shade on request.
Many product variants, dimensions and colours are available straight from stock!