Scegliere una lingua


New: The lightweight material Foamlite® now available ex stock

30 per cent lighter: The closed-pore foamed structure makes Foamlite® P a lightweight sheet

The lightweight material Foamlite® is now available in different dimensions ex stock. Foamlite® is especially developed for applications in which construction materials need to have a very low weight and a high level of mechanical stability. The closed-pore foamed material offers construction engineers a wide range of possibilities in lightweight design.

30 per cent lighter

Foamlite® Pis a PP-C-based lightweight construction material. With a density of 0.65 g/cm³ it is nearly 30 per cent lighter than comparable compact sheets. Therefore the lightweight sheet saves on materials, conserves resources and is easy to handle. This offers completely new possibilities in the design of your application and in dimensioning, as well as economic advantages.

More Properties

  • Very good combination of toughness and rigidity
  • Virtually no water absorption
  • No decomposition, rotting or delamination
  • High quality surface with high scratch resistance
  • Good insulation properties
  • Easy processing, good weldability

Product variants

Foamlite® is also available in special product variants ex stock.


Foamlite® P „cubic grain“

Foamlite® P is available in a slip-resistant design with the special "cubic grain" surface structure. Tests show: The three-dimensional, cube-shaped grain ensures a mechanical frictional connection between floor and shoe.

The slip-resistant property of Foamlite® "cubic grain" is tested according to the following guidelines:

    • DIN 51097: Testing of floor coverings; determination of the anti-slip properties; wet loaded barefoot areas
    • DIN 51130: Testing of floor coverings; determination of the anti-slip properties; work rooms and work areas with slip risk


    Foamlite® P AST

    We have developed Foamlite® P AST especially for areas where there is a need for controlled conductance of electrostatic charge and low weight at the same time. High voltage pulses can arise with uncontrolled electrostatic discharge and destroy sensitive equipment, components and workpieces. With Foamlite® P AST, these components are protected by controlled conductance of the electrostatic charge.

    More properties on request.

    Ex stockDensityColourSurfaceDimension
    Foamlite® P0,65 g/cm³Grey RAL 7004both sides fine grain3000 x 1500 x 6 mm
    3000 x 2000 x 10 mm
    3000 x 2000 x 15 mm
    3000 x 2000 x 18 mm
    Grey RAL 7032both sides fine grain3000 x 2000 x 15 mm
    Black RAL 9005both sides fine grain3000 x 2000 x 10 mm
    Foamlite® P
    „cubic grain“
    0,65 g/cm³Grey RAL 7004One side fine grain /
    one side cubic grain
    3000 x 1500 x 6 mm
    3000 x 2000 x 10 mm
    Black RAL 9005One side fine grain /
    one side cubic grain
    3000 x 2000 x 10 mm
    Foamlite® P AST0,70 g/cm³

    Black RAL 9005

    both sides fine grain4000 x 2000 x 6 mm

    Delivery programme:

      • Width up to 2000 mm
      • Thickness: 5 - 21 mm




      Newsletter Registration